HOME > Product Category > EPS Block Moulding Machine > EPS Automatic Moulding Machine JC-IIID > JC-IIID-6000

EPS Automatic Moulding Machine JC-IIID-6000
Product Name:EPS Automatic Block Moulding Machine with Vacuum
Main features:
  • The machine adopts PLC and touch screen for controlling the mould opening, mould closing, material feeding, steaming, temperature keeping, vacuum cooling, de-moulding and ejecting.
  • The machine adopts high-efficient vacuum system and condensate device to improve moulding speed and reduce the moisture content. Vacuum supported machine is very efficient for making high-density and thick blocks.
  • The machine is welded from high-quality profile steel, through heat treatment, ensuring high strength of the machine without deformation, and possibility of bearing the expansion force of the high-density product.
  • Adopting advanced moulding technical, thee machine is applicable to produce high-density and low-density block and ensure same quality of inside and outside block.
  • The mould cavity surface is coated with Teflon, ensuring easy de-mould and good finish of the block.
  • Block conveying line and electronic weighing scale for machine is optional.
Main Parameters:
1. Mould Specification:6090x1240x1040mm
2. Product Specification:6000x1200x1000mm
3. Steam:
  • Entry:Φ150
  • Consumption:100-130Kg/cycle
  • Pressure:0.6~0.8Mpa
  • 4. Compressed Air:
  • Entry:Φ100
  • Consumption:2-2.5M3/cycle
  • Pressure:0.6~0.8Mpa
    5. Drainage:Φ150mm
    6. Vacuum Drainage: Φ125mm
    7.Condensation Water Drainage: Φ150mm
    8. Electric Power:Power:35.5Kw, Consumption:18kw/h
    9. Material Conveying Pipe:Φ80mm
    10.Production Efficiency:15g/l: 8min/cycle
    11. Overall Dimension (LxWxLxH):12800x4000x3000mm
    13.Room Height Required:6000mm